SHED PLANS GARAGES PHOTOS
12x36 run in shed front elevation

12x36 Run In Shed Plans

sku (horse12x36-RILT)

All Our Shed Plans Feature:

  • Cost Effective - Our shed plans are designed to make your shed simple and inexpensive to build.
  • Easy To Build From - Professionally drawn with step by step instructions to show both an old pro or a first time framer how to build a shed. (see the plans example below).
  • Start Now - Instant download - The shed plans are emailed to you when you purchase so you can start immediately. We use the free PDF file format so you can print them on your home printer or we can postal mail them to you.
  • Materials List - Easily get bids and use the list numbering system to know what part goes where.

The 12x36 Run In shed plans include:

  • Post and Beam Construction - Our run in shed uses common post and beam construction.
  • Oak Kickboards - Oak siding and kick boards help keep your run in shed strength and durability.

12x36 run in shed end view12x36 run in shed left rear12x36 run in shed top view 12x36 run in shed interior12x36 run in shed right rear12x36 run in shed left top view

12x36 Run In Shed Plans Floor Plan

12x36 run in shed floor plan

Sample of our 12x36 Run In Lean To shed plans:

12x36 run in shed plans

12x36 Run In Lean To Shed Plans Include The Following:

  • Materials List:The 12x36 Run In Lean To shed plans come with a complete materials list that is broken down by parts of the shed.
  • Foundation:Two foundation plans are included. Direct bury post or built on 12" round concrete piers and post bases.
  • Floor: The floor for horse run in sheds is typically left as existing dirt.
  • Walls Framing: 4x4 posts with 2x4 oak girt boards and 1x8 oak kick panels on the inside and 1x10 pine boards and battens on the outside
  • Wall Height: The rear shed wall height is 8'-6", the front wall is 10'-6"'. The entry header height is 9'-6".
  • Window: There are no windows on the plans but windows can be added on any wall.
  • Siding: 1x10 boards and 1x2 battens.
  • Roof: The roof is framed using 2x8's to build the rafters. It is sheeted with 1/2" O.S.B. for strength and can have asphalt shingles or metal roofing installed. See shingle manufacturers recommendations for low slope roofs. The plans give you a template and dimensions for the birdsmouth cut angles on the rafters.
  • Roof Pitch: 2/12, this means that for every 2 inches of rise there is 12 inches of run horizontally.
  • Roof Overhang: 24" on the front and 12" on the sides and back.
  • Roofing = Asphalt shingles or Corrugated metal roofing.
  • Trim = 1x4 wood is used to finish the corners.